A TEM study on the microstructure of spark plasma sintered ZrB_2-based composite with nano-sized SiC dopant

Sintering behavior of ZrB_2 ceramic with nano-sized SiC dopant was studied. ZrB_2-25 vol% nano-sized SiC was selected as the starting mixture to fabricate the composite. The manufacturing process was accomplished at 1800℃ for 5 min under 25 MPa via spark plasma sintering(SPS). The as-sintered sample reached a relative density of 99%. Besides the initial phases, namely ZrB_2 and SiC, the high-resolution X-ray diffraction(HRXRD) was used to study the formation of an in-situ ZrC phase. The possible chemical interactions during the ZrC phase formation were scrutinized. The microstructure of the composite was studied by the field emission scanning electron microscopy(FESEM) and transmission electron microscopy(TEM). Elemental analysis through FESEM evaluations revealed the formation of amorphous phases, rich in Zr, C, Si, B, and O elements, which was in harmony with the thermodynamical assessments. TEM studies endorsed the formation of such phases, containing a glassy bed of Si–B–O with ZrC and C islands dispersed therein.     

ZrO2基固体电解质氧传感器的研究现状及发展趋势

近年来,由于ZrO2基固体电解质氧传感器具有高的测氧灵敏度和在高温下的化学稳定性,因而在节约能源、环境保护等方面得到了广泛的应用。该文首先介绍了ZrO2基固体电解质氧传感器的测氧原理,然后阐述了ZrO2基固体电解质氧传感器的研究现状;重点介绍了氧传感器导电理论,及在高温和低温条件下工作的氧传感器研究状况和氧传感器的应用研究,并对氧传感器未来的发展进行了分析和展望,指出为了获得高性能的氧传感器应重点发展纳米材料氧传感器。     

Elaboration and Properties of Nanocomposite Structures Based on Crown Modified Platinum Nanoparticles

1 Results This paper presents the development of platinum nanocomposites structures based on organically modified c.a.2 nm core platinum nanoparticles.The chemical modification of the 4-mercaptoaniline functionalized particles by various in coming molecules is evidenced and precisely quantified.The particles can be dissolved like molecules in various solvents depending on the features of the new crown and X-rays shows that the interparticle distance is affected by the crown modification.These platinum n...     

强直电流伸展弧CVD硬质合金金刚石涂层工具

采用自行研制的强电流直流扩展电弧设备对酸浸和渗硼预处理的YG6刀片进行了金刚石薄膜涂层沉积，并对放于不同位置的沉积刀片表面涂层的激光Raman谱和SEM形貌进行了分析、研究。结果表明：渗硼预处理工艺优于酸浸预处理工艺；在渗硼处理的GY6刀片上，沉积的金刚石薄膜涂层具有大面积、均匀性好和质量高的特点。     

光量子氧透射治疗对冠心病患者血清脂蛋白的影响

目的 :探讨光量子氧透射治疗对冠心病患者血清脂蛋白的影响。方法 :按入院先后随机分为实验组和对照组 ,每组 6 0例 ,两组常规治疗的药物相同 ,实验组加用光量子氧透射治疗 ,并测定两组患者治疗前后血清脂蛋白的变化。结果 :与对照组比较 ,治疗组TC、apoB、LDL -C显著降低 ,HDL -C升高。结论 :光量子氧透射治疗具有显著的调脂功能     

高频等离子体化学气相淀积法制备TiO2超细粒子

利用ＴｉＣｌ４＋Ｏ２体系，在高频等离子体化学气相淀积反应器中合成了纯度高、粒度细的ＴｉＯ２粒子。考察了工艺条件对ＴｉＯ２粒子物性的影响；探讨了ＴｉＯ２粒子晶型控制的方法，金红石型质量分数可通过工艺条件控制；探讨了ＴｉＯ２粒子晶型控制的方法。金红石型质量分数可通过工艺条件控制，减少ＴｉＯ２单体浓度可提高金红石型质量分数；也可通过在原料ＴｉＣｌ４中添加ＡｌＣｌ３等晶型转化剂，使可转化为单一金红石型Ｔｉ     

氧化物半导瓷中晶界势垒的起源

提出了一个关于氧化物半导瓷晶界势垒起源的新观点，认为晶界势垒起源于烧结过程中外界氧在晶界中的扩散，与材料的结构、化学缺陷、掺杂、外界气氛、烧结工艺、组成状态等有密切关系，并用此理论解释了许多实验现象。     

微波等离子体离子化检测器研究

本文采用氢气为载气和等离子体工作气体，以苯和二氧化碳为例，对不同电离电位样品组分经过和不经过等离子体两种样品引入检测器方式进行了详细的对比研究，发现检测器分别具有质量型和浓度型检测器的响应特征．探讨了空气引人等离子体对检测器分析性能的影响．     

交流等离子体显示屏任意驱动波形壁电荷测量方法

为了解决交流等离子体显示屏 (ACPDP)在任意驱动波形下壁电荷测量的难题 ,提出了一种新的测量ACPDP显示屏壁电荷的方法 .该方法采用ACPDP显示屏中几何结构完全相同的 2组放电单元 ,分别串联 2个完全相同的电容器构成测量电路和参考电路 .测量电路包含的放电单元在常规驱动电压下能够放电 ,参考电路包含的放电单元在常规驱动电压下不会放电 ,2个电路并联构成平衡电路以消除位移电流的影响 .对测量电路和参考电路施加相同的驱动波形 ,测量 2个串联电容器之间的电压差即可得到壁电荷的值 .采用该方法 ,对 3电极表面放电ACPDP显示屏壁电荷进行了实际测量 ,首次获得了准备期、寻址期和维持期的壁电荷波形 .该方法对于ACPDP驱动波形的设计和优化具有重要的科学意义和应用价值     

Study on Ceramic Cutting by Plasma Arc

Engineering ceramics are typical difficult-to-machine materials because of high hardness and brittleness. PAC (Plasma Arc Cutting) is a very important thermal cutting process and has been successfully used in cutting stainless steel and other difficult-to-machine alloys. PAC‘s application in cutting ceramics, however, is still limited because the most ceramics are not good electronic conducts, and transferred plasma arc cannot be produced between cathode and work-piece. So we presented a method of plasma ...